Equipment

Roll bending
Roll diameter of 6” X 5’ 0”

• Roll capacity, diameter of 6 1/4” minimum
• For 1/16″ thickness; maximum length of 5′ 0″
• For 1/8″ thickness; maximum length of 5′ 0″
• For 1/4″ thickness; maximum length of 2′ 6″
• For 5/16″ thickness; maximum length of 2′ 0″

Band saw

We have 5 band saws of different dimensions, including some with automatic feed.

Our maximum cutting capacity is 27″ in width and 18″ in height.

Punch Geka

75-ton punch

• Thickness capacity for plates from 1/16″ to 3/4″
• Diameter of holes: from 3/16″, to 1 1/8″
• Throat of this machine: 11 7/8″

165-ton punch

• Thickness capacity for plates from1/16″ to 1 1/4″
• Diameter of holes: from 3/16″, to 1 1/2″
• Throat of this machine: 15 1/2″
• Semy-Paxy system: 15 1/2″ X 40″
• nc1 and dxf files

Angle Master AFPS 643Q

• Marking punch system (letter height = 1/2″)
•  Capacity:
  – Flat bar: from 2″ X 1/4″ minimum to 6″ X 5/8″ maximum
  – Iron angle: from 1 1/2″ X 1 1/2″ X 1/8″ minimum to 6″ X 6″ X 5/8″ maximum
• Holes Diameter : from 1/4″ to 1 1/2″
• Maximum length: 40′ 0″
• nc1 file

Drill-line Peddinghaus PCD1100/B

• Scribing marking system
• Available steel profiles with capacities:
  – Flat bar 3/4″ X 3″ to 12″
  – Channel 3″ to 18″
  – Iron angle: 3″ to 9″
  – H and I beam: 3″ to 27″
  – Tube (HSS) 3″ to 16″
  – Pipe not available
• Maximum length: 65′ 0″
• Holes Diameter: 3/8″-7/16″-1/2″-9/16″-5/8″-11/16″-3/4″-13/16″-7/8″-15/16″-1″-1 1/16″-1 5/16″
• With saw: maximum of 27″
• nc1 file

Shear AccurShear

• Cutting thicknesses available:
  – Steel, from 20 gauge to 3/8″ thick
  – Stainless steel, from 20 gauge to 1/4″ thick
  – Aluminum, from 20 gauge to 1/2″ thick
• Maximum cutting length of 10′ 0″

Flame Cut Esab Sabre-DXG 5000

• Size of the cutting table: 14′ 0″ x 40′ 0″
• Plasma and oxy-fuel cutting
• Plasma capacity
  – Steel, from 16 gauge to 1 1/4″ thick
  – Aluminum, from 16 gauge to 1/2″ thick
  – Stainless steel, from 16 gauge to 1/4″ thick
• Oxy-fuel capacity
  – 1/2″ to 6″
• dxf or dwg file

Stud welder

• Diameter of studs: from 3/8″ to 1″
• Length of up to 12″

Overhead cranes

Our shop is equipped with 20 overhead cranes – from 2 to 15 tons – that enable the manipulation of pieces in a fast and safe manner.

Lift trucks

8 lift trucks with a capacity of between 2 000 lbs. to 16 000 lbs.

Press brake 

Ermaksan Speed Bend

• Capacity of 220 tons X 12′ 0″
• 4 axes

Allsteel

• Capacity of 300 tons X 16′ 0″
• Traditional